All About Decks And Fences Journal News

Fence Replacement Guide

Dec 11

If you are in the market for a new fence or your current fence is in need of replacement, there are some things you need to know before you start shopping. The first step is to determine what type of fence you want and how much it will cost.

There are many types of fences to choose from, including wood, vinyl, aluminum, and steel. Each type has its own benefits and drawbacks, so you'll need to decide which one is best for your needs. Cost is also a major consideration; a wooden fence may be more affordable than a vinyl fence, but it will require more maintenance.

Once you've decided on a type of fence, you need to determine the size and shape of the property that needs to be fenced. This will help you determine how much fencing you need and what type of fence posts, gates, and other accessories you'll need.

The next step is to get quotes from fencing contractors. Be sure to get at least three quotes so you can compare prices. Once you've chosen a contractor, they will give you a quote for the total cost of the project.

If you're DIY inclined, you may want to consider installing the fence yourself. This can save money on labor costs, but it's a big undertaking and may not be suitable for everyone.

Installing a fence can be a daunting task, but if you follow these guidelines, you'll be able to replace your fence without any trouble.

Replacing a fence is a big project, but it's worth it to have a sturdy fence that will last for many years. By following these tips, you can replace your fence quickly and easily and be ready to enjoy your new fence in no time.

Replacing Wood Fence Posts

Wood fence posts need to be replaced from time to time because rot or termite infestation can make them unsafe. If your wood posts are old, cracked, or rotted, they should be replaced before you put up a new fence. Here's how:

Remove the post by digging around it and prying it out with a crowbar. Set this post aside—you may reuse it later if you're only replacing one or two of your fence posts. Dig a hole at least 12" wider than the width of the new post and as deep as the height of the post plus about 12". Pour four inches of gravel into the bottom of the hole, and then add six inches of concrete mix. Use a level to ensure that all sides are flat. Use a trowel to smooth the concrete mix, then insert your new wood post into the hole. Fill around it with gravel and concrete mix to hold it in place. Let the concrete set for two days before you replace your fence.

Hanging a Gate

When hanging a gate on an existing fence line, attach hinges to the fence posts at both ends of the gate frame. Make sure that the gate is level when you hang it by using shims under one side or using a spirit level. Once it's leveled, drive bolts through the hinges where they meet the top of each post above ground level to secure them in place. Attach gate latches on either end of the hinge side of the frame.